Oops! It appears that you have disabled your Javascript. In order for you to see this page as it is meant to appear, we ask that you please re-enable your Javascript!

Best 3D Pen Reviews 2019-2020-Buyer’s Guide and Reviews

Best 3D printing Pen 2019-2020

Best 3d Pens 2019-2020– 3D printing pens are now very popular among the artists,hobbyists, and anyone else for their creativity mind. So 3d pens are very essential for them to show their great creativity.We also reviewed On Best laptop, Best Camera, 3d printing pen, Best Speaker, Best Tablet Etc.

CHECK OUT: Best Selling 3d pens list of amazon.com

But which are the best 3d pens right now? No worry, you are in the right place,I have tried hard and find out the best 3d pens for your best choice. So, I have brought down a great list of best 10 3d pens which are great and excellent. These are the best-tested reviews for the best 3d printing pens in 2019 to find the best one.

So we have selected a list of the best 3d printing pens which are available in the market now.

Now I am going to review the best cheap 3d pens 2018-below,

I specially Recommend you to buy the The MYN3D  printing pen $69.99 -30% Off or,7TECH 3D Printing Pen-$49.95 -50% Off which our best choice. But 3Doodler 3d Printing Pen$82.99 -17% Off  is also great now.

Check out the best selected 3d pens 2019 list and buy the best one.

10 Best 3d Printing Pens 2019

 

The Best 3d Pen 2019-Buying Guide

What is a 3D pen?


A 3D pen looks pretty much like the pencil or pen that we normally use, but the difference is that the former is bulkier. And instead of lead or ball point, the former uses a plastic nib using which users can draw 3D structures. Have you heard of it before? Nope? I’m sure you’re going to read the following information on 3D pens.

You see, there are so many questions on 3D pen – some even ask whether they are good or bad. Well, before we learn how 3d pens work, it makes sense to know that using them is pretty similar to using a normal pen or pencil. 3D pens are held in the same way like any other pen, but the major difference is that the former can be used in a lot of ways that traditional pens aren’t.

Reasons To Use A Pen Over A Printer

A printer is accurate and rigid and helps you make virtual designs of objects you want to create whereas a pen is fluid and free-type which supports freestyle hand-drawings. Printers need a 3D file to give form to something whereas pens enable users to draw any object or structure out of their imagination.

How a 3d Printing Pen Works?

 

Before we proceed further, let me clarify one thing – there is no link between 3D printers and 3D pens. They both are designed for different purposes.

As mentioned earlier, a 3D pen uses plastic to draw an object or a structure, which is different from the concept of using inks in the traditional pens. To draw a 3D object using your pen, all you need to do is fill your pen with plastic filament that comes with the kit. The heating technology used in the pen will automatically heat the plastic. Eventually, the plastic turns from solid to molten state and at this stage you can pretty much draw anything that you want to with your 3D pen. And you can draw on surfaces such as walls, furniture, and plastic.

Almost the same technology is used in something called glue gun. However, 3D pens come in multiple colors and give you more than one option to awaken the sleeping artist inside you.

Ways to use a 3D printing pen:

There is a lot that you can do with 3D pens. They can be used for artistic and decorative works; and also for minor repair works when combined with 3D printers. The most common applications of 3D printing pen include building mini Eiffel towers, homes, ornaments, pendants, and drawing objects like phones, laptops, and iPhone cases.

How to select Best 3d Printing pen:

If you take a quick glance at 3D pens on Amazon alone, you will realize there are at least 90 different 3D printing pens out there. And more can be found elsewhere, like the 3Doodler PRO. But a closer look reveals that most of them are actually clones of another 3D pen, but with different branding and prices.Now, which is the best 3D pen for you? It depends on what you want to do. There are pens for kids, for hobbyists and for artists. Take a look and compare the features:

To make a fair list of the best 3D printing pens, we considered various essential criteria. The basic 3D printing pen is a cool device which requires connection to a power source before it starts producing thin liquid plastic that’s used to make drawings on surfaces such as on papers or in air. Needless to say, a lot of factors come into play which are all essential to your 3D drawing experience with the pen. Here are a few factors we considered, broadly summarised.

Best 3d Printing pen Reviews:

Let’s review the best 3D pens on the market so you can find the perfect one for the artist in you.

 1.Best 3D Printing Pen:Doodler Start Essentials

—Ideal for Children

SEE BEST PRICE

The world’s first 3D pen came about because someone’s 3D printer goofed on a print job. The printer left out one line. Since it had already taken hours to get that far, no one wanted to reprint. They disassembled the 3D printer and manually used the extruder head to complete the job. And that’s how 3Doodler got started manufacturing 3D pens.

The Start Essentials Kit is their pen for children. It uses a special biodegradable filament that doesn’t get too hot to touch. If the child using the pen touches the nozzle, they won’t get burned. It’s the only 3D pen in our review today that’s truly safe for children to use.

The pen itself is very simple to operate. There are two buttons—one for the power and one for the extruder. The Start pen only takes a minute to pre-heat, and it’s completely wireless. There are no cords to get in the way.

Of course, it will need to be recharged, but it comes with a standard micro USB port and cable. An LED light changes color depending on whether the pen is charging, heating up, or ready to use.

The pen’s barrel is made to fit comfortably in small hands, and it’s ambidextrous, easy for kids to control. The Start Essentials kit includes a stencil called a “doodleblock” that makes it very easy to draw curved lines and other basic shapes. And since the filament hardens quickly, a child can literally draw shapes in the air.

If you want ideas for what to make with the 3Doodler Start Pen, the company’s website has hundreds of project ideas, including other stencil designs.

 

2. Best 3d Pen 2019-Dikale 3d Pen

—Inexpensive and Versatile for Hobbyists

SEE BEST PRICE

This is my first ever 3D Pen so I didn’t want to spend a lot of money only to find I had no talent! So I ordered this pen because it had good reviews and wasn’t very expensive. I am actually thrilled with my purchase! The instructions are very clear, and within minutes of opening the box I was making stuff. It comes with a very nice amount of filament, so I was able to play around for quite awhile, learning how to control my hand. The Pen is very easy to use, just select filament type (ABS or PLA), load it up and press the button 1-3 times for the speed you want to go at. Changing colors (filament) was also very simple and problem-free. Overall, I am extremely happy with this purchase, and may even buy another one for my daughter!

 

  • 【Perfect Gift for Kids & Adults】NOTE: 12 Colors PLA are in the PEN BOX, vacuum compressed in two transparent bags to keep PLA dry & fresh. 3D Printing Pen is a perfect gift for kids that helps children to improve spatial thinking, cultivate creation and artistic skills. It’s also a great way for parents and children to spend quality time together
  • ✔️【Easy to Use & Safe for Kids】Simply plug-in, heat up and extrude! Great for beginners and experienced artists/ 3D printing enthusiasts! Auto Shut-off & Auto Sleep Function, safe for kids
  • ✔️【Bonus 120 Feet PLA Filament Pack & 250 Stencils eBooks】This 3D Pen is compatible with both PLA and ABS. We bonus 1.75mm PLA filament Pack of 12 Different Colors, total 120 Feet. Compared to ABS, the PLA Filament is more eco-friendly and safer. e-Books website: http://www.dikale.com/file-download
  • ✔️【One Button Control & Adjustable Temperature / Speed】Different from other 3D pens on the market, Dikale 3D pen don’t need long press button, but press button once to make the creation easily and relax children’s finger. 3 printing temperature and speed modes adjustable. Advanced LCD screen clearly display the corresponding speed
  • ✔️【100% Satisfaction Guarantee】Please feel free to contact us at us.service@dikale.com whenever you need help. We guarantee 30 days returned and money back, 1 year warranty, lifetime service

 

If you’ve been looking at 3D pens for a while, you might recognize the Soyan Standard 3D Pen. It’s similar to pens from brands like Manve and 7Tech, which all seem to be clones of each other. Hobbyists who want to get started with 3D art and printing like the Soyan because it’s cheap and it’s versatile.

It’s versatile because this pen works with both PLA and ABS filament from any manufacturer just as long as it’s the 1.75mm size. You’re not locked into buying a certain brand at all. And that fact makes it cheaper over the long run, too, not just at purchase time.

Next, the Soyan 3D pen lets you have control over the extrusion speed. And since the filament tends to harden immediately, you can easily draw objects vertically, not just horizontally.

Just keep in mind that this pen needs to be plugged into electricity to function. Since the nozzle gets quite hot, it’s best to supervise younger children if they use this device.

Finally, the Soyan kit includes sample filaments and paper templates. Use the templates, or stencils, to get started drawing with your new 3D pen.

3.Best 3d Printing Pen 2019:MYNT3D Professional Printing

—For Artists Who Want Better Printing Control

SEE BEST PRICE

If you’re serious about 3D pen printing and art, you’ll want the best control you can get. The MYNT3D Professional pen handles both PLA and ABS filament with ease, especially since you can set the exact temperature you want, as well as the extrusion speed.

By using the OLED display, you can define the exact temperature, down to 1-degree, between 130 and 240 Celsius, or 266 to 464 F. By experimenting with this feature, you can use decorative filaments, too, like bronze or wood mixtures. The display will also show you which kind of material you are currently using.

If you take advantage of the slider on the side of the pen, you can select the extrusion speed, or simply set it to flow continuously without you needing to hold down the button. This is especially nice when you have a large area to fill in.

Finally, the nozzle on the MYNT3D pen can be removed for cleaning, or replaced if there is a problem in the future.

The pen comes with an AC adapter and three colors of ABS filament. It’s covered by a one-year limited warranty.

 

4.Best 3d Printing pen 2019:AIO Robotics

—For Artists Working with PLA Only

SEE BEST PRICE

The AIO Robotics 3D pen offers full control similar to the MYNT3D pen, but it only accepts PLA filament. If you’re an artist or hobbyist that’s concerned about plastic and the environment, this may be the best pen for you. PLA is biodegradable, and it’s made from plant starch, which is arenewable resource.

The pen has a slim, all-metal body with a small OLED display. On the display you’ll see the type and temperature of the filament you’re using. Two tiny rock buttons near the screen let you adjust the temperature up or down one degree at a time.

Two other tiny buttons on the other side of the display let you change the extrusion speed. Below them are the filament feed and unload buttons. When you choose a PLA filament to use, you can select any brand you want, as long as its 1.75mm in thickness. This is a time- and money-saving feature over the long run.

The AIO Robotics pen requires external power to run, but you can operate it from a 5V wall charger or a power bank, as long as the current is at least 2Amps. It comes with an AC adapter and cord and sample filament. The pen has both CE and ROHS approval, and it’s covered by a one-year manufacturer’s warrant

 

5.Best 3d Printing Pen 2019:3Doodler Create 3D Pen

—Easy to Use for Adult Artists

SEE BEST PRICE

The 3Doodler Create is the adult version of the 3Doodler Start pen at the top of this article. It has advanced features for artists and hobbyists, like the ability to use PLA, ABS, and other flexible filaments. Plus, 3Doodler has many accessories available for use with the Create pen, including the DoodlePad, the JetPack, and a foot pedal to control the extrusion (instead of pressing a button).

While you’ll be locked into using only 3Doodler filaments, they have a wide selection of colors and textures, including glow-in-the-dark and sparkly plastics. Their website offers hundreds of free stencils, too.

The Create pen itself has a pleasant design. The lightweight aluminum body has ergonomic control buttons for temperature control and extrusion speed. But you won’t have as much control over those two factors as you would with some of the other 3D pens in our review.

Instead, the 3D Create pen is quite simple to use. There are only two choices for heating it—high for ABS and FLEXY filaments, and low for PLA. And you can extrude the filament either fast or slowly.

But if you’re anxious to get started on 3D art with a pen, the Create is a great choice for beginning artists. It comes with fifty strands of colored filament and a power adapter, plus your purchase is protected by a 360-day replacement policy and round-the-clock customer service.

 

6.Best 3d pen 2019:Polaroid Draw 3D Pen

for Aspiring Artists Has Stencil App

SEE BEST PRICE

Polaroid makes the Draw 3D Pen for both children and adults who are fascinated with three dimensional art projects. The best feature is the ability to use the Polaroid Play Trace App that turns any photo into a stencil. Plus, Polaroid also offers a large gallery of their own stencils online, too.

The Draw pen is similar to many other 3D pens on the market. It has two buttons to increase or decrease the extrusion speed. It also has an LED display that shows the operating temperature and the PLA setting. And that’s the main downfall of the Draw—it only works with PLA filament. But it comes with 65 feet for free to get you started.

The box includes a Trace App screen protector for a tablet and four adhesive pads to hold your artwork steady on a surface while you work. There’s also a pen holder stand, USB cable, and an AC adapter.Polaroid offers a one-year full warranty plus toll-free phone support.

7.Best 3d pen 2019:Aerb 3D Pen

Very Good Choice for Enthusiasts

SEE BEST PRICE

If you compare the Aerb 3D pen to the Polaroid Draw, do you see the similarities? Their shapes are similar, they both have displays that show the operating temperature, and they both come with a pen stand. But let’s show you where these two pens differ.

First, the Aerb works with either PLA or ABS filament as it can operate between 160 and 210 degrees F. That means you can use any kind or color as long as it is 1.75mm in thickness.

Second, while the Polaroid Draw lets you speed up or slow down the rate of flow, the Aerb has 8 speed control settings for more precise extrusion. It’s simple to load and unload a filament to switch colors during a project. And the nozzle itself is removable so you can clean it or replace it.

If you want more control and flexibility than some of the big brands can give you, check out the Aerb and other clone 3D pens. Many times you’ll get plenty of value at

 

 8.Best 3d pen 2019:PACKGOUT 3D Doodler

—Perfect for Hobbyists and Artists

SEE BEST PRICE

The PACKGOUT 3D pen, just like the one from Soyan, doesn’t care if you use ABS or PLA filament. It’s not picky about brand, either. You can set the flow rate, or extrusion speed, as well as the nozzle temperature. This is yet another clone 3D pen that’s perfect for hobbyists and enthusiasts on a budget.

The pen also has a nice bundle of features like a quiet fan, an anti-jam design, and a built-in unclogging mechanism. There’s even a power-saving safety procedure: the pen enters a standby mode if it sits unused for 5 minutes.

On the LCD screen you can see the operating temperature. Below the screen and to the right side, you’ll find the speed controller. Just one note about this—PACKGOUT recommends not using the pen at a high rate of speed if the temperature is low because it could cause a jam. But in the worst case scenario, you can remove and replace the nozzle if needed.

The PACKGOUT 3D pen comes with a 1-year guarantee, a power adapter, 30 grams of 1.75mm PLA filament, and access to free templates online.

 

9.Best 3d Pen 2019-Parner 3D Printing Pen Kit

— Choice for Artists and Hobbyists

SEE BEST PRICE

This 3-D doodle pen is an excellent, creative, fun addition to any craft room or art studio. We purchased this for our nephew who loves to draw and I cannot wait to see his art spring from the pages and into life with this really cool pen. I love that the pen comes with so many different filament colors. The design is sturdy and functional as well as ergonomic and easy to clean. The tools and additions to the pen are easy to use and the directions were not complicated at all. Children and adults alike will be able to enjoy this tool for years to come. We will update the post when he sends us pictures of his creations.

 

The slender body of the pen is built with aircraft-grade aluminum. It has a small display that reveals the operating temperature since you can adjust that from 180 to 220 degrees Celsius. There is a selector button for the print speed with three settings for low, medium, and high. If the pen is inactive for 3 minutes, it will enter standby mode. Just press the load button to activate it again.

This pen is so fun and easy to use! I love it! The little stand is great for while its heating up or cooling down after use and for when you just need to set it down for a moment. All the color options on it are so great. The only time I had trouble with it was just deciding which color to use because I liked them all lol! I really love that it came with one glow in the dark. It’s super easy and simple. I tried using it with both a silicone mat and just a sheet of paper as a base. Both were good. The silicone was easy because I didn’t have ro worry about my surface burning and the plastic didn’t stick to it at all but the paper was also good because I could draw a shape in pencil first then trace with the 3d pen and the plastic stayed exactly where I wanted it while I was working. Over all it’s just as I expected!

 

 10.Best 3d printing pen-Printer by TITANIUM

MICRO- Pen for Children or Adults

SEE BEST PRICE

TITANIUM MICRO’s 3D pen printer is marketed toward children, but the body of the pen might be a little large for small hands to manage. On the upside, it’s lightweight and simple to operate.

There are two LED lights that indicate if the pen is powered on and if it’s hot and ready to use. Since you’ll need to use TITANIUM MICRO’s own filament, you don’t need to worry about temperature settings for different materials. But you can change the extrusion speed if you like.

The pen uses 5V power, so it can run off the included wall adapter or your own power bank for portability. It comes with 30 feet of filament in the box.

 

More Top 10 3d Pen 2019

1.Ipeson 3D Printer Pen (With LCD Screen)

The 3D Ipeson Printer pen is unique in its physical appearance compared to the other types of 3D printing; with the unique design with an LCD screen, it sure does work magic. The PLA filament components which are used in its manufacture are notable too.3D Printing pen are the latest development in 3D printing technology.This technology FDM(fused deposition modeling) is adapted by leading 3D printers like Makerbot, 3D system, and Afinia.
3D pen is a great tool for anyone interested in 3D modelling- from the newest beginner to the most seasoned expert. The only limitation of 3D drawing is your imagination!SEE BEST PRICE

The filaments accompanied with six packed 32.8ft or length which serves as the replacement of ink

The plastic filament enables the artist to make 3D drawings which can be possible on virtually all surfaces including in space. The Ipeson 3D printing pen gives the ability to choose each personalized plastic filament. It is less bulky and comfortable to work with.

The iPeson (2015 2nd+ version)3D Printing Pen Package includes as follow
√ 1x 3D Printing Pen
√ 1x USA Power Adapter
√ Free 3x 1.75mm ABS Filament with different colors (Random Color), 10 gram per loop
√ 1x Operation instruction booklet
√ 6x PLA 3d filament,32.8ft/color

Product Features
√ Intelligence auto standby mode after 5 minutes idling
√ Nozzle diameter: 0.4-0.7mm
√ Power input: 12V 3A
√ Heating temperature: degree adjustable
√ With advanced thermal management, filaments jamming detection, and super silence design
√ The slender pen body suits hands habit
√ The stepless speed change by single hand
√ Create freestyle 3D objects
√ Plastic heats up and then cools to a solid shape
√ Endless creative opportunities
√ Makes a wonderful gift for creative children and adults.

Safety and Warning Instruction
1. This device is suitable for children over 8 years old and adult use; Children should use it under the tutelage of adult.
2. The nozzle and surrounding area can reach a 230 degree high temperature; keep your bare hands away from the nozzle.

Top Customer Review

This is a lot of fun and takes work and practice. What a great combination for kids. Both of mine are really willing to put in the effort because the potential is so great. We are really enjoying this!The first pen we received….did not include the pen. Oops! The wrong item was shipped. NO WORRIES. We realized this at 10pm the Saturday night of Labor Day weekend. A pen was delivered the next day…Uh oh….it didn’t work. NO WORRIES. A new one was in my hands by mid day on Labor Day.And…we love this tool! Thank you.

The pros

  • Easy to use for beginners as well as experts.
  • Light and less bulky at only 65 grams.
  • Almost effortless utility.
  • The LCD screen adds a nice touch of detail.
  • Designed with user safety as the main aim.

The Cons

  • High initial cost
  • Insufficient Guide materials on the operation.
  • Plastic can lessen the grip

I would happily recommend to any persons that have the talent of making creative drawings and are ready to spend some hours in finding out how to use this 3D printing pen in making the drawing.

2. MYNT3D Professional -Best Printing 3D Pen

The MYN3D professional printing pen makes it our list of the best 3d printing pens. This pen came recently in 2016 to the market. It functions as a typical 3d printing pen making use of plastic as described in the introductory segment above. The pen is also made unique in its ways by the features it supports.

The weight of the pen is pretty low. This makes it suitable for use with a single hand. The pen is ideal for use with kids and children as it does not tire them while using it.

Double clicking the operating buttons makes the pen extrude the plastic automatically. This means that you can continuously keep making your drawings without need to press buttons repeatedly.

Instead of an LCD screen, this pen comes with OLED display. The display gives the user information on the thermal characteristics of the pen as it operates. This is what enables the user to manipulate and control the operating temperature of the device in the range of 1300 -2400 degrees Celsius.

This is achieved with minute increments or decrements of about 20 Celsius. This fine adjustment enables extruding smaller thickness of the material to make drawings.

This also helps in saving filament, making it economical for artists on a budget. It is also receptive to external temperature changes and can adjust well, unlike the other pens.

Consuming 10 watts of power with 5 volts of current, this great 3D drawing pen can be used outdoors without trouble. This pen is accepted by the Federal Communications Commission, the European conformity and the Restriction of the Hazardous Substances. This adds to the trust factor.

Product features

  • Sketch, print & doodle amazing three-dimensional masterpieces with this precision-crafted stylus!
  • Adjustable feed lets you regulate speed & flow for optimal control of material while you’re drawing
  • Temperature is adjustable in 1 degree increments from 130 to 240 C, for optimal fine-tuning
  • Large, OLED display lets you monitor temperature of material to help you achieve a wide variety of effects
  • Kit includes 3 colors of ABS plastic filament A/C adapter and slim, ergonomic touch pen with 1 year limited warranty

This 3D printing pen is thus considered the best since it has the following various advantages.

  1. Easy to use- This professional 3D printing pen is quite useful in drawing, drafting and in painting in a three-dimensional quality very easily. This pen also allows one to use it in drawing in the air hence guarantees one to come up with a 3D masterpiece. This 3D printing pen is astonishing in creating three-dimensional work of art, which is the very accurate size and shape. 3D printing pen has a big OLED screen that helps in monitoring of the temperature levels. This helps in improving the quality of the object being drawn. There are also three columns of the Acrylonitrile Butadiene Styrene which are plastic filaments that can be used in the printing process.
  2. Convenient weight- This pen is light weighing approximately 40 to 65grams hence it is easy for it to be done by a variety of people ranging from upcoming artists like the children to older people and the designers and graphic designers.
  3. Efficient speed- It is also easy to maneuver and has a good speed control. 3D printing pen has a modifiable option. This lets the person drawing to control the speed and also the flow of the best control of the information flowing out of the material during the whole process of printing. It also has a three loops ABS filament of 1.75 mm each.
  4. Sleek design- This scribbler 3D pen has preference over the other pens for home users since it has an attractive design.  This type of pen is so pleasant to look at, and it got a good size to hold on to and hence it is easy to move fast while making a drawing. Hence despite the feeling of the dominating of the thicker and largely shaped, the specialists in the drawing industry need to know that the advanced 3D is of good dimension to carry out the work.
  5. Flexibility- This 3D printing pen is also very flexible. With this type of printing pen, one can draw any drawing ranging from a very small size to a very big drawing, ranging from the subtle to the models. This allows an individual to show off the innovation he or she has discovered on a new level of creativeness. This new 3D printing pen has transformed people’s thoughts concerning the 2D as it is considered less flexible compared to the new 3D.
  6. Portability- This 3D printing pen is highly portable. This 3D printer pen is usually given out through a wall charger which is evident that a 3D printing pen will be easy carried out around when one is walking. This fact helps out such that despite where one is with the long distance from one’s nation or one is planning to stay for a longer duration one will be able to use the 3D printing pen for the duration without experiencing any difficulties.

Top Customer Reviews:

This pen is awesome. If you don’t have a 3D printer, this is a fun crafting tool that will let you enter the magical world of plastic. If you do already have a 3D printer, then this pen pretty much makes you a wizard.

I have used this pen with a variety of plastic filaments including ABS, PLA, PETG, Polycarbonate, TPU and electrically conductive Protopasta. It has not let me down. There is a typo in the product description, the maximum temperature for this product is 230C, not 240C. This is only a problem with polycarbonate, and even then you can still work at 230C.

Free drawing with the pen is fun and only takes a little practice. You can make huge gangling structures of incredibly low density, which is pretty neat. You can also make solid objects like a little statue of your dog, and my dog thinks that’s pretty funny.

The Pros

  • Ease of use -This 3D printing pen lets you sketch, draw and paint in three-dimensions almost effortlessly.
  • Light and convenient weightThis pen is approximately 40 to 65 grams. That’s pretty less than the standard 80 to 100 grams you expect in most other devices.
  • High speed – It is also simple to sketch with and has excellent control of speed.There is a variable option in the 3D printing pen which enables the artist to control the flow of the material according to your speed of drawing.
  • Excellent looping – It also has three loop ABS filament of 1.75 mm each.
  • Unique attractive design
  • Flexible – This 3D printing pen is also highly flexible; one can draw any drawing ranging from a very tiny size to a big model
  • Excellent Portability -This 3D printing pen is very easy to walk around with. A wall charger usually accompanies your order.

The Cons

  • Minimum guide information – insufficient information on how the temperature at the nozzle is to be adjusted.
  • Exaggerated branding – Too much marketing hype that promises the moon leaves many feeling cheated.

I would happily recommend to any persons that have the talent of making creative drawings and are ready to spend some hours in finding out how to use this 3D printing pen in making the drawing.

3. Scribbler 3D -Best 3d Printing Pen-2019

SEE BEST PRICE

Scribbler V3 is the most updated design so far. It has a very cool look and very nice feeling surface. It has the convenient, ergonomic case. The pen’s weight is only 50 grams. There are no metal parts, the nozzle is removable and it is made of ceramics. The heating element is enclosed in heat-resistant plastic case. The plastic thread feeder has 6 speeds, the ability to select plastic type (ABS or PLA) and to set operating temperature allow to use the device’s flexible operation mode, thus increasing possibilities of its use in daily life and creative work. In addition, 3D pen Scribbler V3 One is equipped with the OLED-display to which all operation mode data are output in a clear and available way.

The first on the list is the Scribbler V3, and as the name may suggest, it is an updated version of the legacy Scribbler Pen, this pen has been in the market for quite some time and is taking people by surprise. Perhaps one of the best features about this pen is the amazing build quality and perfect ergonomics that make this pen such a breeze to use. With that said, let’s find out some details about how good this pen is.

For starters, the pen comes in various different colors, but don’t worry, you can actually use filaments of different colors with the pen. As of now, the 3D pen is available in a total number of 8 colors, the available colors are Blue, Green, Purple, Red, White, and Yellow.

In our testing, it was revealed that the pen is extremely light weight and highly easy to operate, and if you are having concerns about how easy it is to change the filament, then don’t, the pen operates in a rather easy and friendly manner that allows you to operate it without any hassle.

See why it is so best for you:

To be very honest, the Scribbler 3D Pen V3 didn’t really have any major downsides to begin with, all the tests were passed with flying colours, however, for people who are used to the traditional way of drawing using a pen or a pencil might have some issues drawing with this pen at first because like all 3D pens, this one has a learning curve. Rest assured, this is without a shadow of a doubt, an amazing pen.

Pros

  • Incredibly light-weight at just 2.6 oz.
  • Extremely responsive and convenient.
  • Comes with a large OLED screen that enhances the usability.
  • Can be used on almost all of the surface types.

Cons

  • Might feel bulky and uneasy to use to traditional artists.

4. 7 TECH 3D Printing Pen – Best 3D Pen-2019

If you want to buy cheap 7tech 3d 

printingpen,choose 7tech 3d printing pen. THE BEST 3D PRINTING PEN IN 7TECH MALL! √7TECH 3D PEN was featured as “The Best 3D Printing Pen ” .

This specific 3D printing pen was designed with only one purpose in mind; the easy to use, user-friendly nature. With that said, the company behind this amazing 3D printing pen ensured us that the product will have an incredibly silent operating mode, in addition to that, the pen also comes with several features that make this 3D printing pen, one of the best we have seen. Let’s find out more about it.

The 7TECH 3D printing pen has some advanced features that are welcomed additions, for instance, this 3D printing pen comes with one of the best thermal control, in addition to that, the 3D printing pen also manages to notify you about the filament getting stuck. Last but not the least, in case you hate the super-fast or super-slow extrusion of many 3D pens, you don’t have to worry about this one as it actually lets you control the extrusion according to your own preferred speed.

The only 2 issues we actually encountered during our review and testing were the lack of supplied filaments as well as how hot the pen can get while it’s fully operational. Do keep in mind that while you are operating the pen, the temperature can go incredibly high, and to an extent that it may cause damage to your skin if you get In contact with it. With that said, we also realized that the supplied filament wasn’t enough, but then again, companies through these in for the royalty. With that said, the 7TECH 3D Printing Pen is one of the finest 3D printing pens we have used and is certainly one of the top 3D pens.

Pros

  • Highly easy to use for both newcomers and veteran artists.
  • The pen happens to be light weight and rather slim, something that is always a welcome addition.
  • The 7TECH 3D printing pen also comes with an advanced unclogging system that prevents the filament from clogging after cooling down.
  • There is an aluminum spatula included that protects your fingers from the hot nozzle.
  • The 1 year warranty is something of an additional bonus.

Cons

  • The operating temperature can get unbearable.
  • This pen is not that much easy to use. (Not for a Newbie or Kid)
  • The supplied filaments are just not enough.

5. Canbor 3d Pen-Best For Kids

The fourth on our list is the Canbor 3D Pen before we go into details, you should know that this pen is also sold under a different name that is called Joyluxy Intelligent 3D. With that said,

the Intelligent 3D pen is one of the best 3D pens 2017 we have had the pleasure of reviewing. Speaking of functions and features, the 3D pen is quite basic and has all the necessities anyone would want in a 3D pen. With that out of the question, let’s take a closer, and proper look at the CCbetter Intelligent 3D pen from Joyluxy.

The pen comes in a sleek-looking box that is no bigger than your usual smartphone box, inside the box, you find the usual power brick along with the 2 supplied filaments. Do keep in mind that you can always purchase separate filaments of your own choice, the manufacturer was nice enough to include a stand that you can use to put your pen on when it is not in use. The 3D printing pen was rather easy to use for both the newcomers as well as veteran artists, the testing revealed that it managed to work on almost all the major materials with great ease and consistently gave us brilliant results. The pen also comes with an OLED that has a small status indicator that tells you when the filament is heated and ready to use, quite a nice tough to be honest.

Speaking of cons, the thorough and concise testing didn’t really reveal any issues to begin with, however, we would have liked a bit more detailed instruction guide, especially for people who are reluctant when it comes to using such stuff without the proper guide to help them out. Apart from that, the pen managed to perform excellently in all the tests.

With that said, the CCBetter Intelligent 3D Pen from Joyluxy is probably one of our most favourite 3D pens we have used, and is a definite recommendation for someone who’s looking for the best bang for the buck.

Pros

  • The ergonomically stylish design makes the pen really easy to use.
  • Unlike most 3D printing pens, this one actually looks good, and vibrant.
  • The additional pen holder is an incredible addition to people who are too clumsy with such items.
  • The pen is actually quite easy to fix as far as the problems are tangible.

Cons

  • None whatsoever.

6.Myriwell 3D Printing Pen – Best 3D for Kids

This is a brand new product from the 3D Printing pen. It’s really freakin’ fun to draw with, fun for adults and children alike.

As compared to the other 3D printing pens we have used and reviewed, the Lay3r 3D pen is oddly large, however, as big as it may seem, the 3D pen proved to be extremely good at handling and not heavy at all.

Another great advantage of the Lay3r 3D pen is that it is really easy to use. How easy, you ask? With proper guidance, a 12-year-old can use the pen without making any mistakes. However, the great thing about it is that it doesn’t matter if a kid is using this amazing pen or some veteran artist is, the pen is extremely easy to handle for people of all age and skill level.

We were surprised to see that the company has included a fan inside the pen to make sure it stays cool during the hot operating temperature, last but not the least, the pen comes with an automatic shutdown feature that turns off the pen when it’s not being operated.

As for the downsides, the only downside we actually think exists is the size of the pen, but then again, considering how it has a fan built inside of it, the size can be justified.

Pros

  • Easy to use.
  • Lots of interesting features.
  • Top notch built quality.
  • Included fan is a cherry on top.
  • Comes with one year warranty.
Cons
  • Although the inclusion of a fan is a nice touch, it actually increases the size of the pen by a great measure.

7. Dikale 3D Printing Pen 2019-2020

The Dikale 3D Printing Pen is a great gift for anyone who wants to try 3D drawing. Comes with a money back guarantee waranty, led screen, temp control.The next product on our list is the GENESIS 3D Pen, for those who don’t know, the company is also known for creating a really popular 3D printer. The company behind Genesis 3D pen is known as Lasso Labs and today we are bringing you this brilliant 3D pen. Let’s see how it manages to fair against the tough competition that is currently existing because of the saturated market of 3D printing pens.

The Genesis 3D pen is nicely designed and looks quite sophisticated, it’s nowhere near as slim and small as the Lix 3D printing pen but when it comes to doing the job, it isn’t any less than the competition. Our review unit came in all black, however, there are a few other color combinations available. The pen managed to perform eloquently in all the tests; it was smooth, the plastic filament didn’t get stuck, and the pen’s chassis didn’t get abnormally hot – something that is common with a lot of 3D pens. Lasso Labs was also kind enough to add in 5 filaments in the box, and you can always purchase the filaments separately. With that said, the Genesis 3D pen pleased us with the consistent performance and a minimal learning curve.

Moving on to the complaints, we don’t really have any. The only 3D pen managed to perform perfectly fine in almost all the situations and didn’t disappoint us at all.

Pros

  • Extremely user friendly for both kids and veteran artists.
  • Has the ability to use a different type of plastics.
  • Great Built Quality.
  • Comes with amazing warranty.
  • Light weight and portable construction makes up a trouble free experience.

Cons

  • Only good for small scale project.
  • Heat up if use for a large project.

8. 3Doodler 3d Printing Pen — Best One

The next one in the list is 3Doodler 3D printing pen. This stylish pen comes with 50, yes, you have heard it, 50 plastic filaments — the most number of filaments we have received with a 3D printing pen. The overall looks and feels of the pen are amazing, and the color (black) we received for reviewing made the pen look like something that came out from a Tom Clancy novel. With that said, let’s see if the pen is worth the $110 price tag. However, before we begin, you should know this pen is in no way related to another product that goes by the same name and is also known as the first 3D printing pen in the world.

This is perhaps one of the best-looking 3D printing pens available in the market, right next to the Lix 3D printing pen we have reviewed earlier, the greatest thing about this pen is that it comes with 50 filaments, and they are extremely easy to replace and do not get clogged. The testing phase revealed that the pen manages to work perfectly fine on almost all the surfaces. The pen happens to be really easy to use, especially for the veteran artists who have good experience with drawing and using such tools, as for newcomers, there is a slight learning curve for them.

In all honesty, we didn’t find any cons at all. There were some concerns, but pointing them out would be nitpicking as almost all the 3D pens we have reviewed had them with the exception of Lix 3D printing pen.

Pros

  • Sleek and innovative design.
  • The build quality is one of the finest.
  • 50 provided filaments is a nice bonus.
  • The 3D pen is really easy to setup.

Cons

  • Offers a learning curve for newcomers.
  • The Pen is kinda heavy as compared to others in our lineup.

9. Glyby Intelligent 3D Printing Pen

Our next entry is the Glyby Intelligent 3D printing pen. Reviewers and users have hailed it as one of the best 3D printing pens ever available, and sure, it is nowhere near good looking as the Lix 3D printing pen, but in terms of functionality, the pen manages to perform quite well. How well, you ask? Well, let’s find out, shall we?

The Glyby Intelligent 3D printing pen is perhaps the cheapest 3D printing pen available in the market, it retails for just $50 and in terms of performance, it manages to give a groundbreaking performance and works on almost all the surfaces. With that said, do keep in mind that this 3D printing pen is made with kids in mind, so if you want something for some extra professional work, you probably might want to spend your money somewhere else, and on something more expensive that would be more appropriate for the professional work. Moving on, the pen is easy to use for kids, it has enough features to keep them happy for a long time, and as long as they operate under a proper supervision, things won’t go wrong.

At the given price, there isn’t anything to complain about the Glyby Intelligent 3D printing pen, the main purpose of this 3D printing pen is to make sure that the children can developer their minds properly, and it does a great job at that. Sure there are better 3D printing pens available in the market, but do keep in mind that they are usually above $90. With that said, the Glyby 3D printing pen is an amazing gift for kids who are always up for learning new, interesting and soulful things.

Pros

  • Cheap and easy to use.
  • Has an appealing look that will please the children.
  • Good build quality.

Cons

  • None.

10. Victors 3D Printing Pen – Cordless 3D Pen

We are bringing something extraordinary for you, just like the Lix 3D printing pen, the Victors 3D cordless printing pen is a revolution on its own. What’s good about it? It doesn’t require a wire to work, which means that there is an insane amount of portability that comes with this 3D printing pen, and if you want more cool things from this pen then here’s another surprise; unlike the rest of the 3D printing pens, this one doesn’t have any heating parts. Yes, you have heard it, this pen uses plastic without even heating and melting it.

As compared to the other pens that use thermoplastics, the CreoPop uses photopolymers, this is the type of ink that starts liquefying as soon as it is exposed to LED diodes. With that said, let’s find out more about the pen itself. Considering how there is no heated, melting plastic involved, the pen is extremely easy to use and completely safe for children as there won’t be accidental burns. The testing revealed that despite a completely different ink, pen managed to perform excellently in almost all the tests despite having a completely different type of ink.

Coming to the cons, or things we didn’t like about the pen, to be honest, there is absolutely nothing wrong with it. If you want something that is futuristic, easy to use, and fancy, then you should definitely get this one. The only concern we have is that currently, the ink is supplied only by one company, and that might be a problem for some people as other pens can pretty much use any plastic filament available in the market. With that out of the way, the CreoPop 3D Cordless Printing Pen is amazing and one of a kind that will make any art lover happy.

Pros

  • Innovative, one of a kind design.
  • Can use scented inks to create art that actually has a pleasant scent.
  • The objects produced using this pen have a long lasting freshness as compared to the other 3D pens.

Cons

  • The supported ink is currently provided by the manufacturer itself, greatly limiting the availability for some people.
  • Fat and Bulky Design.

BEST 3D PRINTING PEN 2020

BEST 3D PEN 2020

Best 3D Pen 2019 Buyer’s Guide

Now that you’ve seen the top 3D pens, all that’s left to do is choose between them. Here are some tips for selecting the best 3D pen for your projects.

Features like temperature and speed controls

Are you purchasing a 3D pen for a child, an adult, or a variety of users? What is their level of experience?For example, you may prefer a simple pen that doesn’t get too hot to touch if you buy for a child. But an adult with experience drawing 3-dimensional objects will probably prefer precise temperature and speed controls.

Size and weight of the pen, plus the location of controls

Take into account the size of the pen compared to the size of the user’s hand. Consider the placement of the flow rate controls if the person is left-handed. Also ponder whether the pen might be too awkward or heavy for the intended user.

Some pens have plastic bodies; others have metal casings. Some controls slide, while others are push buttons. And some of those buttons are pretty small for people with large fingers. Take a good look at the item’s photos and videos, and see it in person before buying, if possible

Corded or cordless, plus portability

Many of the less expensive 3D pens are corded. They run off regular electricity from the wall. But some are rechargeable, and others can operate from a portable external power source like a computer’s USB port or a cell phone power bank. Think about whether a cord is going to get in your way, and whether you might like to carry your pen to draw away from home.

Compatible filaments

The type of filaments you can use with any given pen will make or break that pen’s usability down the road. For example, if you purchase a pen that requires the use of a proprietary filament, and that manufacturer goes out of business, you’ll have an electronic device that is useless. Or if you have a 3D pen that’s compatible with only one kind of filament, but later you want to work with a different substance, you’ll need to buy a new pen.

Proprietary filaments have both pluses and minuses. The plus is that you’re likely to have fewer jams or other problems. The minus is that you’ll be forced to pay whatever price the manufacturer sets for as long as you stay in their ecosystem.

Finally, remember that ABS filaments are better for items that need to be flexible and resistant to heat and impacts. A smartphone case is a good example of an ABS project. Meanwhile, PLA is fine for sculptures, models, and other kinds of art and low-wear toys. And if you want to make decorative projects that are luminescent or sparkly, check ahead of time where you can purchase the filament you need.

Bonuses like apps, accessories, and stencils

Depending on the manufacturer, your new 3D pen may come with a variety of bonuses like free stencils or an app for your tablet or smartphone. If the ability to expand beyond the basics is important to you, buy from manufacturers that offer extras like these, or sell accessories for your pen.

3Doodler is a good example of a manufacturer with a diverse ecosystem of accessories. They offer some products for free, like stencils you can download and print. But they also sell items like a foot pedal to control extrusion and rest your hand.

Polaroid, on the other hand, has an app for that. Well, it’s an app that lets you trace an image and turn it into a 3D object. Take into account all that a company offers because you never know how far you’ll take your new hobby once you begin.

Safety features

One last important aspect to consider when buying a 3-D pen are its safety features. These may range from a standby mode after a few minutes of inactivity, to a nozzle that doesn’t get too hot to touch and won’t burn kids.

Why are filaments important?

The kind of 3D printing you can do is limited to the type of filaments you can use with your pen.

PLA, or biodegradable polylactic acid, requires a lower temperature to melt. It’s a little more likely to cause a jam because it’s rather sticky when it’s molten. But it doesn’t have a burning plastic smell like ABS. It’s also great for printing with a pen because it can cool quickly without warping or cracking.

ABS, or acrylonitrile butadiene styrene, is a plastic made from oil. Objects printed with ABS are more durable and flexible. But ABS stinks when it’s heated, and it can warp if it cools off too fast. On the other hand, it’s rare to have a nozzle clog when printing with ABS.

Both ABS and PLA can be blended with other materials like wood and metal to make decorative filaments. You’re likely to find every color of the rainbow, plus glitter and glow-in-the-dark dyes.

If you plan to print objects that require flexibility, and impact and heat resistance, go with ABS filament. You can glue ABS plastic, file it, sand it, and treat it with acetone. You can also recycle it when you’re done. People who make phone cases, electrical enclosures, mechanical parts like cogwheels, and tool handles usually choose ABS for the job.

If you want to stay friendly to the environment, choose PLA filament. It’s biodegradable and recyclable. While you can cut, file, and sand it, it’s difficult to glue and acetone washes will dissolve it. PLA is the most common choice for prototype mockups, containers, models, and toys that won’t get heavy wear.

One last note: keep any kind of filament in a sealed container when not in use. This is because both ABS and PLA can absorb moisture, which will degrade their performance.

Tips for successful 3D printing with a pen

When you’re new to using a 3D pen, or even 3D printing in general, there are a few things that can make your introduction easier.

Smooth flowing without jams

3D pens can occasionally jam, but you can avoid most problems with a couple of simple tricks. One is to trim the end of a partially-used filament strand before you load it. Snip off any deformation with a pair of scissors. Two is to avoid using the high speed setting when you’re operating at a low temperature.

Getting used to drawing with a 3D pen

A lot of new users practice by doing 2D sketches on a stencil, or template. Print out a simple design on paper, then place just one small dot as your anchor point on the paper. Don’t break the flow of the plastic, simply continue moving the pen slowly while extruding the filament as you trace the pattern you printed.

The filament should stick to the paper as it cools and hardens. When you want to break off the flow, just wait for a moment while the plastic cools, then remove the pen. You can smooth down unruly points by reheating them and pressing them down with the point of the pen when it’s not extruding.

You can also smooth rough-looking sketches by placing them in the oven for a few minutes. Select a temperature just a bit higher than the melting point of the filament. Your design should soften up and smooth out somewhat.

Making 3D objects with a pen and stencil

Once you’ve gotten the hang of sketching with the pen, try assembling a 3D object from parts you draw. Many of the pen manufacturers offer free templates for you to trace and fill in. Once those individual objects are built, you can join them together, like building a house with four walls and a roof that you drew separately.

Freehand drawing with a 3D pen in the air

Possibly the most exciting feature of a 3D pen is the ability to draw in the air. This requires you to move at the same speed that the nozzle extrudes filament, which may be very slow. Begin by placing a large dot, or anchor point, on your working surface. Then move the pen slowly upward and away from the anchor. As the plastic cools, it solidifies enough to support itself in an upright column.

To make curved lines, you may need to draw a straight line in the air, then reform it with your hands into an arch. You can also join separate lines by pausing with the pen to heat up and melt the connection between the parts so it will solidify as one piece.

Cleanup after using a 3D pen

The best practice is to never put your pen away with leftover filament inside it. That includes the nozzle. You may have to remove and clean out the nozzle, if that’s possible with your model of pen. Some brands let you completely replace the nozzle with a new one.

Most filament manufacturers will tell you to never use less than a one-inch remnant of filament in your pen. Small bits like that can cause jams. While some 3D pens are simple to disassemble, others are difficult or impossible to open safely. It’s best to avoid problems in the first place.

Recommendation

To help you further narrow down your choices today, here are our recommendations.

For young children, you can’t go wrong with the 3Doodler Start Essentials Kit. The Start Pen is safe for kids because it doesn’t get too hot to touch. It’s rechargeable, so there is no power cord to get in the way. And the kit comes with accessories to help your little one get a great start in the world of 3D art. The only downside is that you’ll be limited to 3Doodler’s own filament.

If you’re buying for older children and teens, take a look at the Polaroid Draw. While it’s a rather basic 3D pen, it works with Polaroid’s Trace App that helps anyone turn a photo into a 3D object, one stencil at a time. And the pen comes with screen protectors in the box so you can get started drawing right on your tablet.

Adults who want to begin working with 3D printing pens, but don’t want to deal with complicated controls, might prefer these three models: 3Doodler Create, TITANIUM MICRO, and Soyan. Each is very simple to operate, but Soyan is the only one of the three that allows you to choose the brand of filament you use.

For hobbyists and enthusiasts who want maximum control, check out AIO Robotics, Aerb, and PACKGOUT’s 3D Doodler. These pens let the user control both the temperature and the flow rate, plus they are compatible with either ABS and PLA filaments.

Finally, artists will appreciate the TIPEYE 3D Printing Pen Kit and the MYNT3D Professional Printing 3D Pen. Both allow maximum control and work with multiple types of filaments. Both are covered by one-year warranties, too.

Who Is The Product Suitable For?

Some of the best 3D Pen reviews you come across don’t focus enough on who is actually going to use it. While artists have taken to using them, they are also popular with children.

Most of the products written about here are suitable for children as well as adults. The children mostly have to be aged 6-years-old or above to be able to use a 3D Pen.

The child must also be supervised by an adult when using the product as the plastic filaments used can often reach high temperatures. A 3D Pen is perfect for letting your child’s creative imagination run wild.

What Type Of Plastic Filaments Can Be Used?

Most of the products written about in this article will be compatible with both the ABS plastic filament and the PLA ones. Both types come in a wide range of bright colors which help you create a bright vibrant object.

Both plastics are fairly simple to use but the PLA filament is thought to be eco-friendlier. Probably due in part to it not needing to be heated at such a high temperature as the ABS filament.

There is a whole host of different filaments on the market but PLA and ABS are the most common most likely to fit any model of 3D Pen.

How Easy Is It To Use?

Like with most products on the market the ease of use often depends on the actual user. Having said that most of the products featured in this article are lightweight and aimed at children. So, the easier they are to handle the easier they should be to use.

It is advised that if a child is using a 3D Pen then they must be supervised by an adult because of the temperatures the pen can reach.

Do You Get Anything Extra With The Product?

We all like to think we are getting something extra for free when we buy any product. With this in mind, nearly all the products written about in this article come with free plastic filaments included.

The amount of free plastic filament you actually get differs in quantity depending on which model you decide to purchase. In addition to this, some of the products featured come with a manufacturer’s warranty included in the purchase price.

Any Safety Features?

Some of the models featured in this article come with an automatic-shut-off timer. This enables the pen to switch itself off after five minutes of non-use. This is important because it means the product does not overheat and it also saves on wasting the battery.

Some models have an LCD display screen which allows you to see what temperature the pen is working at any given time during use. On some models, the temperature can be easily adjusted at the click of a button.

 

Before buying a 3D pen, you must familiarize with its functioning and applications. The modus operandi is different with each brand. Between filament and design, there can be tons of variables. Newest 3D pen products may not share the same design as the world’s first 3Doodler model. 3Doodler for instance, uses plastic filament, thus making it easy to draw in the air. Real-time creation of 3D objects in serious pace was a real prospect. 3D pens don’t have a long history.

The very first project of its kind was funded as a kick starter product.  So, you wouldn’t have too many variables to know about, in order to master 3D pen technology. The success of 3Doodler inspired another gem of a product in Scribbler. With productions in China, Scribbler was still able to deliver with 6-month warranty plus return policy. Some unattended promises such as Lix tiny 3D pen still work under progress for years now. If you don’t know how to go about choosing your 3D pen, this can be trickiest of markets.

3D technology takes large steps as we speak. Nevertheless, there isn’t too much to learn about, in comparison to typical household electronics. Getting a grasp of this technology can be real easy. Evolution of this technology can be explained quickly by comparing plastic and cool ink pens.

More Best 3d Printing Pen :

Final Words:

The 3D printing technology industry is relatively new, but the market is full of different products. With our comparison of the best 3D printing pens, we hope we’ve helped point out some subtle but important differences between the top contenders.

Finally, despite these two disadvantages, the 3D printing pen is a good purchase. When the smaller sizes are compared with the other brands, this 3D printing pen is the most favorable with the aggressive edge in this printing business.

By simply using this printing pen once, an individual could see that it benefits one in the consummation as per one’s expectation, giving one the solace and providing the features that one can make the best drawings of the most loved things with it. This explains why this 3D printing pen was guaranteed considering the additional importance to the customers compared to the other brands.

In conclusion, I would happily recommend to any persons that have the talent of making creative drawings and are ready to spend some hours in finding out how to use this 3D printing pen in making the drawing.

Buying a 3D Pen can bring you hours of fun for all the family. It allows children to let their imaginations run wild.

You may have dreamed about creating that special piece of bespoke artwork for your home or even that toy object that you have always wanted to make. The 3D Pen can also be an excellent educational tool to help your child learn about three-dimensional drawing and a whole lot more.

Be sure to purchase the product that best suits you and your family’s individual creative needs the best.


Also Read:

 

Summary
Review Date
Reviewed Item
Best 3d Printing Pen 2018-2019
Author Rating
51star1star1star1star1star

Leave a Reply

Your email address will not be published. Required fields are marked *